`
wsql
  • 浏览: 11712673 次
  • 性别: Icon_minigender_1
  • 来自: 深圳
文章分类
社区版块
存档分类
最新评论

linux大内存页 HugePages on Linux

 
阅读更多

HugePages on Linux

HugePages是linux内核的一个特性,使用hugepage可以用更大的内存页来取代传统的4K页面。使用HugePage主要带来如下好处

1,没有swap。Notswappable: HugePages are not swappable. Therefore there is no page-in/page-outmechanism overhead.HugePages are universally regarded as pinned.

2,减轻快表压力。Reliefof TLB pressure:TLB表格的更小了,效率提高

3,减轻换页表的负载。每个表单需64字节,如果管理50GB的物理内存,如果使用传统4K页面pagetable需要800M大小,而是用HugePages仅需要40M

4,提高内存的性能,降低CPU负载,原理同上

HugePages和oracle AMM(自动内存管理)是互斥的,所有使用HugePages必须设置内存参数MEMORY_TARGET / MEMORY_MAX_TARGET 为0


配置HugePages的具体步骤

1、修改内核参数memlock,单位是KB,如果内存是128G,memlock的大小要稍微小于物理内存。计划lock 100GB的内存大小。参数设置为大约SGA是没有坏处的。

vi /etc/security/limits.conf

*soft memlock 104857600

*hard memlock 104857600

2,使用数据库帐号验证大小

[oracle@dtydb5 ~]$ ulimit -a|grep lock

core file size (blocks, -c) 0

file size (blocks, -f) unlimited

max locked memory (kbytes, -l) 104857600

file locks (-x) unlimited

3,如果使用AMM内存管理,要取消改设置。MEMORY_TARGET和 MEMORY_MAX_TARGET参数设置为0

SQL> alter system reset memory_targetscope=spfile ;

SQL> alter system resetmemory_max_target scope=spfile;

SQL> alter system set sga_target = 10Gscope=spfile;

SQL> alter system setpga_aggregate_target = 4G scope = spfile;

4,计算需要使用的hugepage页面的大小。hugepage目前只能用于共享内存段等少量内存类型,例如oracle SGA。PGA则不适用,这些内存一般不能用于其它用途,因此设置太小则不足够放下所有内存段,太大则空间浪费。

简单的计算原理是total SGA_MAX_SIZE(多个instance的总和)/hugepagesize + N

N为少量内存盈余,一般多出100就足够了。如果主机内存128GB,计划70GB用于SGA共享内存,则大内存页需70×1024/2=35840

也可使用oracle提供的计算公式,基本原理是使用ipcs -m来计算共享内存段的大小。统计前注意关闭AMM;

vi hugepages_settings.sh

#!/bin/bash

#

# hugepages_settings.sh

#

# Linux bash script to compute values for the

# recommended HugePages/HugeTLB configuration

#

# Note: This script does calculation for all shared memory

# segments available when the script is run, no matter it

# is an Oracle RDBMS shared memory segment or not.

#

# This script is provided by Doc ID 401749.1 from My Oracle Support

# http://support.oracle.com

# Welcome text

echo "

This script is provided by Doc ID 401749.1 from My Oracle Support

(http://support.oracle.com) where it is intended to compute values for

the recommended HugePages/HugeTLB configuration for the current shared

memory segments. Before proceeding with the execution please make sure

that:

* Oracle Database instance(s) are up and running

* Oracle Database 11g Automatic Memory Management (AMM) is not setup

(See Doc ID 749851.1)

* The shared memory segments can be listed by command:

# ipcs -m

Press Enter to proceed..."

read

# Check for the kernel version

KERN=`uname -r | awk -F. '{ printf("%d.%d\n",$1,$2); }'`

# Find out the HugePage size

HPG_SZ=`grep Hugepagesize /proc/meminfo | awk '{print $2}'`

# Initialize the counter

NUM_PG=0

# Cumulative number of pages required to handle the running shared memory segments

for SEG_BYTES in `ipcs -m | awk '{print $5}' | grep "[0-9][0-9]*"`

do

MIN_PG=`echo "$SEG_BYTES/($HPG_SZ*1024)" | bc -q`

if [ $MIN_PG -gt 0 ]; then

NUM_PG=`echo "$NUM_PG+$MIN_PG+1" | bc -q`

fi

done

RES_BYTES=`echo "$NUM_PG * $HPG_SZ * 1024" | bc -q`

# An SGA less than 100MB does not make sense

# Bail out if that is the case

if [ $RES_BYTES -lt 100000000 ]; then

echo "***********"

echo "** ERROR **"

echo "***********"

echo "Sorry! There are not enough total of shared memory segments allocated for

HugePages configuration. HugePages can only be used for shared memory segments

that you can list by command:

# ipcs -m

of a size that can match an Oracle Database SGA. Please make sure that:

* Oracle Database instance is up and running

* Oracle Database 11g Automatic Memory Management (AMM) is not configured"

exit 1

fi

# Finish with results

case $KERN in

'2.4') HUGETLB_POOL=`echo "$NUM_PG*$HPG_SZ/1024" | bc -q`;

echo "Recommended setting: vm.hugetlb_pool = $HUGETLB_POOL" ;;

'2.6') echo "Recommended setting: vm.nr_hugepages = $NUM_PG" ;;

*) echo "Unrecognized kernel version $KERN. Exiting." ;;

esac

# End

5,修改vm.nr_hugepages参数,值为上步计算的数值

vi /etc/sysctl.conf

vm.nr_hugepages = 1496

sysctl -p 命令使配置生效。

6,关闭数据库,重启主机和数据库(理论上不需要重启主机,建议重启)

7,验证是否设置正确

grep HugePages /proc/meminfo

HugePages_Free小于HugePages_Total的值则表示设置成功。如果HugePages_Rsvd应该保持少量保留内存。

注意,HugePages如果配置不恰当会引起系统性能下降等风险,需要慎重。

参考资料

HugePages on Linux: What It Is... and WhatIt Is Not... [ID 361323.1]

HugePages on Oracle Linux 64-bit [ID361468.1]


分享到:
评论

相关推荐

Global site tag (gtag.js) - Google Analytics